COMPRO TN1500 User Manual page 15

To begin setup, insert the installation CD into your CD-ROM drive, and the iWizard will start automatically.
1. Selec t the language for installation
network camera.
2. Select your camera from the list, and
wait until the live video and camera
information are displayed on the right. (You
can double-check the device name and
the MAC ID which are printed on the serial
number sticker on the back of the camera
and on the package). Click [Next] when
you're ready .
Note:
If Autorun has been disabled in your computer, please browse the
contents of the installation CD and double-click on the "iWizard.exe"
file to run the setup wizard.
Figure 3-2. Language selection
Figure 3-3. Camera selection
Connect the Cables
Chapter 3: Installation
3-5