Ir Light Control; Embed Text And Image; Flip Mode - COMPRO TN1500 User Manual

Compro TN1500/TN1500W

IR Light Control

The network camera is equipped with an ambient light sensor and 30 IR LEDs, which makes it capable of
fitting different lighting situations and providing 24/7 surveillance.
The light sensor allows the camera to detect the lighting condition of the environment and to turn on/off the
IR LEDs accordingly; you can configure the IR light operation mode to be [Auto], [Always On], [Always Off ], or
[By Schedule].
For scheduling on/off time of the IR LEDs, you can directly input the desired On and Off time, and set the
repeat option to be [always] or [only during time frame].

Embed Text and Image

You can embed text and/or image at 4 different locations on the live screen. (Upper Left, Upper Right, Lower
Left, Lower Right). To embed an image, click on the Upload Image text link and choose a suitable image (limited
to JPEG/BMP, 100x30 pixels, 128KB.) To remove an embedded image, press the [Clear] button.

Flip Mode

Enabling this option will flip the image vertically, making the image appear rotated 180 degrees. Enable this
setting when you need to reposition your camera from standard position to ceiling mounting position.
6-4 Camera Settings
Camera Settings
Light Sensor
Normal lighting
(Indoor lights on)
Without IR LEDs
(Indoor lights off )
Figure 6-4. Effect of IR LEDs
Figure 6-5. IR light control
IR LEDs (30 in
total)
With IR LEDs
(Indoor lights off )