Input Select; Input1 - Sharp Aquos LC-37AW5X Operation Manual

Useful adjustment settings

Input Select

Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the TV
TV/VIDEO allows you to choose from the available
input sources.
1
Press TV/VIDEO on the TV.
2
Press TV/VIDEO on the TV to select the input
source.
• The image and sound from the selected input
source are output on the TV.
• You can also select the input source by
pressing a/b.
Using INPUT1, INPUT2, INPUT3 or INPUT4 on the
remote control unit
INPUT1, INPUT2, INPUT3 or INPUT4 allows you to
directly select the desired input source.
Press the desired input source button among
INPUT1, INPUT2, INPUT3 or INPUT4 on the remote
control.
• The image and sound from the selected input source are
output on the TV.
32
LC-AW5X_27-32 32
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press ENTER.
4
Press a/b to select "Input1", and then press
ENTER.
5
Press a/b to select a signal type you want
to set, and then press ENTER.
Input source
Input 1 Auto, Component, Video
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
• When the signal type is set to "Auto", the input terminal
where cable is connected is automatically selected.
• When the signal type is set to "Auto" and multiple video
signal cables are connected, the signal type is selected
in the following prioritised order:
Input 1: Components Video
9/12/06, 10:35 AM
Selectable item