Using External Equipment; Displaying An External Equipment Image; Displaying A Dvd Image (Example); Input Select - Sharp Aquos LC-46G7X Operation Manual

Using external equipment

Displaying an external equipment image

Explanation here is for the setting when connecting
DVD to INPUT1 terminal.
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.
• If the image does not come in clearly, you may need to
change the input signal type setting on the "Input Select"
menu.
• Refer to your external equipment operation manual for
the signal type.

Displaying a DVD image (Example)

1
To watch a DVD image, select "INPUT1"
using TV/VIDEO on the remote control unit
or TV/VIDEO on the TV.
INPUT SOURCE
TV
2
Select the desired signal type on "Input
Select" in the "Option" menu.
For INPUT1 signal
[ Option ... Input Select ]
MENU
The setting is stored and can be selected.
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
Auto
COMPONENT
VIDEO

Input Select

Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on the TV
TV/VIDEO allows you to choose from the available
input sources.
1
Press TV/VIDEO on the remote control unit
or on the TV.
2
Press TV/VIDEO on the remote control unit
or on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by
pressing a/b.
Using INPUT4 or 5 (HDMI) on the remote control unit
INPUT4 or 5 (HDMI) allows you to directly select the
HDMI input source.
Press INPUT4 or 5 (HDMI) on the remote control.
• The image and sound from the HDMI input source are
output on the TV.
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press ENTER.
4
Press a/b to select a signal type you want
to set, and then press ENTER.
Input source
INPUT 1/INPUT 2
INPUT 3
INPUT 6
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
• When the signal type is set to "Auto", the input terminal
where cable is connected is automatically selected.
• When the signal type is set to "Auto" and multiple video
signal cables are connected, the signal type is selected
in the following prioritised order:
INPUT 1/INPUT 2: COMPONENT s VIDEO
INPUT 3: S-VIDEO s VIDEO
• When the signal type for "INPUT6" is set to "DIGITAL" or
"ANALOGUE", a "PC" or "AV" signal is automatically
detected.
Selectable item
Auto, COMPONENT, VIDEO
Auto, S-VIDEO, VIDEO
Auto, DIGITAL, ANALOGUE
43