Av Mode Selection; Opc (Optical Picture Control) Setting; Av Mode; Opc - Sharp Aquos LC-37AW5X Operation Manual

Basic adjustment settings

AV mode selection

AV mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
Using AV MODE on the remote control unit
1
Press AV MODE.
• Present AV mode displays.
2
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
AV input mode
AV Mode: STANDARD
AV Mode: DYNAMIC
AV Mode: USER (TV)
Using AV Mode on the menu screen
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
Press a/b to select "AV Mode", and then
3
press ENTER.
4
Press a/b to select the desired item, and
then press ENTER.
Selected item
For a highly defined image in a normally
STANDARD
bright room.
MOVIE For a movie.
GAME Lowers image brightness for easier viewing.
Allows the user to customise settings as
USER
desired. You can set the mode for each
input source.
For a clear-cut image emphasising high
DYNAMIC
contrast for sports viewing.
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
22
LC-AW5X_22-26
AV Mode: MOVIE
AV Mode: GAME
Description
22

OPC (Optical Picture Control) setting

You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
Using OPC on the remote control unit
Press OPC to switch the OPC function on and off.
Using OPC on the menu screen
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
3
Press a/b to select "OPC", and then press
ENTER.
4
Press a/b to select the desired item, and
then press ENTER.
Selected item
The brightness is fixed at the value set in
Off
"Backlight" (See page 23).
On Automatically adjusts.
On (Display) Displays the OPC effect on the screen while
adjusting the brightness of the screen.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
9/12/06, 10:34 AM
Description