Input Signal (For Pc Input Mode); Noise Clean; Noise Clean; Language - Sharp AQUOS LC-37HV4U Operation Manual

Useful adjustment settings

Input signal (for PC input mode)

• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
640g400
640g480
1024g768
NOTE
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 6 input signals listed above.
SOURCE
POWER
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Input Signal" and then
press SET/ENTER.
PC MENU
Input Signal
Auto Sync.
Fine Sync.
Picture Flip

Language

4
Press a/b to select the desired input signal
on the display.
PC MENU
Setup
Input Signal
54
Downloaded from: http://www.usersmanualguide.com/
720g400
848g480
1280g768
MENU TV/SAT/DVD DTV/DVD TOP
RETURN MENU MENU
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A B C D
POWER INPUT VOL VOL
RECEIVER
Setup Option
[Standard]
[English]
Example
640 x 480
848 x 480

Noise clean

Produces a clearer video image.
MENU TV/SAT/DVD
RETURN MENU
SOURCE
POWER
SET/
ENTER
FAVORITE CH
A B
POWER INPUT VOL
RECEIVER
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Option".
3
Press a/b to select "Noise Clean", and then
press SET/ENTER.
• Some items may be grayed out. They are not
selectable.
TV MENU
Option

Input Select

Noise Clean

Audio Out
Cool Climate
4
Press a/b to select the desired level, and
then press SET/ENTER.
TV MENU
Option
Noise Clean
NOTE
• "Noise Clean" is not selectable when channel display
shows an input resolution of 480P, 720P or 1080I.
DTV/DVD TOP
MENU
DTV/SAT
GUIDE
DTV/SAT
INFO
VCR REC
C D
VOL
[Auto]
[Low]
[Fixed]
[Off]
Off
High
Low