Other Useful Features; Setting When Using External Devices; Additional Features; Skipping Specified Inputs - Sharp Aquos LC-32LE700E Operation Manual

Other useful features

Setting when using external
devices

Input source settings

Option

Input select

For setting the signal type of external equipment.
EXT 1 Y/C, CVBS, RGB
EXT 2 Y/C, CVBS
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment for the
signal type.
Setup

Input label

You can label each input source with a custom
description.
1
Press b to select the desired input source.
2
Go to "MENU" > "Setup" > "Input label".
3 Press a/b/c/d to select each character of
the new name for the input source, and then
press ;.
4
Repeat until the label is fully spelt out.
NOTE
• The label can be six characters or less.
• When you want to set an input source label of less than six
characters, select "END" to set the name.
INPUT SOURCE
TV
EXT 1
DVD
EXT 3
NOTE
• You cannot change labels if the input source is "TV" or "USB".
34
LC-LE700E_GB3.indd 34 LC-LE700E_GB3.indd 34
Item
CLEAR
BACK
END

Skipping specified inputs

Setup

Input skip

This setting allows you to skip the SCART, HDMI or RGB
input on the input source selection operation.
EXT 1 (SCART)
EXT 2 (SCART)
EXT 4 (RGB)
HDMI 1 Yes
HDMI 2
HDMI 3
HDMI 4

Colour system settings

Option
Colour system
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• The factory preset value is "Auto".
• If "Auto" is selected, the colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g., "PAL", "SECAM").

Additional features

Option
Setting display colour
You can change the background colour of the OSD
(menu screen), EPG screen, channel display and
programme information to blue, gray, red, or green.
Option

Channel selecting effect

This function shows a screen effect when choosing or
changing channels.
No
2009/07/13 19:11:45 2009/07/13 19:11:45