Input Signal Source; Input Select - Sharp LC-30AA1H Operation Manual

Useful adjustment settings

Input signal source

Input selection
Can use for selecting the input source.
1
Press TV/VIDEO/PC on the remote control
unit or INPUT on the Display.
• INPUT SOURCE menu displays.
2
Press TV/VIDEO/PC on the remote control
unit or INPUT on the Display to select the
input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
NOTE
• Some items may be greyed out. They are not selectable.
Input signal setting
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
• Option menu displays.
3
Press a/b to select "Input Select", and then
press ENTER.
[ Option ... Input Select ]
MENU
Option

Input Select

Input Label
Audio Out
Cool Climate
Colour System
54
LC-37AA1H(E)-g
[Fixed]
[Off]
[AUTO]
54
4
Press a/b to select a signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no colour image displays.
For INPUT 1 signal
[Option ... Input Select]
MENU
COMPONENT
S-Video
For INPUT 2 signal
MENU [Option ... Input Select]
S-Video
For INPUT 3 signal
MENU [Option ... Input Select]
COMPONENT
S-Video
For INPUT 4 signal
[Option ... Input Select]
MENU
S-Video
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
• Below are signal types used for COMPONENT connection.
480i (60Hz), 480p (60Hz), 580i (50Hz), 580p (50Hz), 720p
(60Hz) 1 , 1080i (50Hz 2 /60Hz)
1 Auto-detects video signal frequency.
2 1080i (50Hz) corresponds to a SMPTE275M signal.
(Horizontal frequency is 28.125kHz.)
03.11.6, 8:25 AM
AUTO
Video
AUTO
Video
AUTO
Video
AUTO
Video