Table of Contents
Advertisement
Other useful features
Setting when using external
devices
Input source settings
Option
Input Select
For setting the signal type of external equipment.
Item
INPUT4: Auto, S-VIDEO, VIDEO
INPUT5: Auto, COMPONENT, VIDEO
INPUT6: Auto, COMPONENT, VIDEO
NOTE
•
If no (colour) image displays, try changing to another
signal type.
•
Check the operation manual of the external equipment for
the signal type.
•
When the signal type is set to "Auto", the input terminal
where a cable is connected is automatically selected.
Setup
Input Label
You can label each input source with a custom
description.
1
Press INPUT to select the desired input source.
2
Go to "MENU" > "Setup" > "Input Label".
3
Press a/b/c/d to select each character of the
new name for the input source, and then press
ENTER.
DVD
A
B
C
D
E
K
L
M
N
O
U
V
W
X
Y
0 1 2 3 4 5 6 7 8 9
4
Repeat until the label is fully spelt out.
NOTE
•
The label can be six characters or less.
•
When you want to set an input source label of less than six
characters, select "END" to set the name.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
DVD
INPUT7
NOTE
•
You cannot change labels if the input source is "TV".
F
G
H
I
J
CLEAR
P
Q
R
S
T
BACK
Z
+
–
.
_
END
Skipping specified inputs
Setup
Input Skip
This setting allows you to skip INPUT1~3 or INPUT7
on the Input Source Selection operation.
INPUT 1 (HDMI)
INPUT 2 (HDMI)
INPUT 3 (HDMI)
INPUT 7 (RGB)
Colour system settings
Option
Colour System
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
•
The factory preset value is "Auto".
•
If "Auto" is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g. "PAL", "SECAM").
Additional features
Option
Setting Display Colour
You can change the background colour of the OSD
(menu screen), channel display and programme
information, etc. to the blue, gray, red or green.
Y es
No
31
Advertisement
Table of Contents
Troubleshooting
