Input Label; Image Position; Position - Sharp Aquos LC-37AW5X Operation Manual

Useful adjustment settings

Input Label

You can assign each input source a label you like.
1
Press INPUT1, INPUT2, INPUT3, or INPUT4
to select the desired input source.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Setup".
4
Press a/b to select "Input Label", and then
press ENTER.
5
Press a/b to select characters and c/d to
move to the desired digit to label the input
source.
• When you want to change the input label that
you have already assigned to the default name,
press c/d to move to "CLEAR" on the "Input
Label" screen, and then press ENTER.
6
Repeat the above until the name is fully spelt
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
NOTE
• You cannot change labels if the input source is TV.
28
LC-AW5X_27-32
TV
INPUT1
INPUT2
DVD
(Example)
28

Image position

For adjusting a picture's horizontal and vertical position.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Position", and then
press ENTER.
4
Press a/b to select "H-Pos." or "V-Pos.".
H-Pos. [0] –
V-Pos. [0] –
Reset
5
Press c/d to adjust the item to your desired

position.

Selected item
H-Pos.
Centres the image by moving it to the left or right.
V-Pos.
Centres the image by moving it up or down.
NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select "Reset", and then press ENTER.
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or input signals.
9/12/06, 10:34 AM
+
+
Description