Hdmi Setup; Signal Type; Colour Matrix; Auto View - Sharp Aquos LC-37AW5X Operation Manual

Useful adjustment settings

HDMI Setup

HDMI (High-Definition Multimedia Interface) terminal
selection.
To watch an HDMI equipment image, select
1
"INPUT3" or "INPUT4" using INPUT3 or
INPUT4 on the remote control unit or
TV/VIDEO on the TV.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Option".
4
Press a/b to select "HDMI Setup", and then
press ENTER.
• The HDMI Setup can be selected only when
"INPUT3" or "INPUT4" is selected.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
DNR
Input Select
Blue Screen
Colour System
Power Control

HDMI Setup

5
Press a/b to select the desired item or
setting, and then press ENTER.
HDMI Setup
Selectable
items
items
Signal RGB/
Type YCbCr4:4:4/
YCbCr4:2:2
Colour Auto/
Matrix ITU601/
ITU709
Auto Enable/
View Disable
Audio Digital/
Select Analogue
34
LC-AW5X_33-34
Description
Select the video signal type from
the HDMI terminal. User settings
for this item are normally in effect
only when the TV is connected with
a DVI-HDMI conversion cable.
When connected to an HDMI
device, the TV automatically
detects the "Signal Type" and
ignores user settings before
operating.
Select the video colour matrix type
when a YCbCr signal is input.
Select the YCbCr colour system
when a YCbCr signal is input.
When an RGB signal is input, the
settings for this item are ignored.
"Auto" should normally be
selected.
Set whether or not to use WIDE
MODE based on signal recognition,
including an HDMI signal.
Select "Digital" for audio signal via
the HDMI terminal. Select
"Analogue" for audio signal via the
AUDIO jack. (selectable only when
using INPUT3 [HDMI] terminals.)
34
NOTE
• Refer to your external equipment operation manual for
the signal type.
• When connecting a DVI-HDMI conversion adaptor/cable
to the HDMI terminals, the image may not come in clearly.
9/12/06, 10:35 AM