Using External Equipment; Displaying An External Equipment Image; Input Select - Sharp Aquos LC-42D~43U Operation Manual

Using external equipment
To view external source images, select the input
source from INPUT on the remote control unit or on
the 1V.
INPUT FLASHBACK
0 0
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2, you may need
to change the input signal type setting on the "Input
Select" menu.
~~;.~l'f
Press MENU to display the MENU screen, and
r'-.~:f'(~
then press ....
/~
to select "Option".
J
INPUT1
Press MENU to exit.
• The setting is stored and can be selected on the
"INPUT SOURCE" menu.
Press
J","!"
to select the signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, images are
not displayed or displayed without any color.
~
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 2 to Auto, the TV will automatically
select the input signal.
• Setting INPUT 1 or 2 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
INPUT 1 or 2:
CD
COMPONENT VIDEO
®VIDEO
Press
JJi,J"
to select "Input Select", and then
press ENTER.
- VOL
+
v
CH A INPUT POWER
c::=J c::=J
0
CJ
INPUT SOURCE
TV
VOL CH
SURROUNO
j+)
(JMUTE
aU
v
a
FREEZE MENU
a ~>!.~ 0
8~m
EXIT
~.
.. RETURN a
~
a
,.jJ
INPUT2
.", INPUT3
J INPUT4
J
INPUTS
J
INPUT6
Press INPUT.
• A list of selectable sources appears.
Press INPUT again to select the input source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
./"T.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
~
• See pages 14 and 15 for external equipment connection.
@-
30
Using external equipment
To view external source images, select the input
source from INPUT on the remote control unit or on
the 1V.
INPUT FLASHBACK
0 0
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2, you may need
to change the input signal type setting on the "Input
Select" menu.
~~;.~l'f
Press MENU to display the MENU screen, and
r'-.~:f'(~
then press ....
/~
to select "Option".
J
INPUT1
Press MENU to exit.
• The setting is stored and can be selected on the
"INPUT SOURCE" menu.
Press
J","!"
to select the signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, images are
not displayed or displayed without any color.
~
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 2 to Auto, the TV will automatically
select the input signal.
• Setting INPUT 1 or 2 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
INPUT 1 or 2:
CD
COMPONENT VIDEO
®VIDEO
Press
JJi,J"
to select "Input Select", and then
press ENTER.
- VOL
+
v
CH A INPUT POWER
c::=J c::=J
0
CJ
INPUT SOURCE
TV
VOL CH
SURROUNO
j+)
(JMUTE
aU
v
a
FREEZE MENU
a ~>!.~ 0
8~m
EXIT
~.
.. RETURN a
~
a
,.jJ
INPUT2
.", INPUT3
J INPUT4
J
INPUTS
J
INPUT6
Press INPUT.
• A list of selectable sources appears.
Press INPUT again to select the input source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
./"T.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
~
• See pages 14 and 15 for external equipment connection.
@-
30