Sharp LC-37A37M Service Manual

TopPage
In the interests of user safety (required by safety regulations in some countries) the set should be restored to its
original condition and only parts identical to those specified should be used.
This model is based on the LC-32A37M and partially modified.
For the contents not covered in this Service Manual, accordingly, please refer to the LC-32A37M (SY8U6LC32A37M)

Service Manual.

OUTLINE AND DIFFERENCES FROM BASE MODEL
OUTLINE................................................ . ............i
DIFFERENCES FROM BASE MODEL.. . ............i
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRE-
CAUTION ............................................... . ...........ii
PRECAUTIONS FOR USING LEAD-FREE
SOLDER ................................................ . .......... iii
CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS ................................. . ....... 1-1
CHAPTER 2. OPERATION MANUAL
[1] OPERATION MANUAL .......................... . ....... 2-1
CHAPTER 3. DIMENSIONS
[1] DIMENSIONS ........................................ . ....... 3-1
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
SERVICE MANUAL
LCD COLOR TELEVISION
MODEL
OUTLINE
CONTENTS
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS...................4-1
CHAPTER 5. OVERALL WIRING DIAGRAM
[1] OVERALL WIRING DIAGRAM ......................5-1
CHAPTER 6. PRINTED WIRING BOARD
[1] POWER UNIT................................................6-1
[2] INVERTER UNIT ...........................................6-4
CHAPTER 7. SCHEMATIC DIAGRAM
[1] SCHEMATIC DIAGRAM ................................7-1
Parts Guide
No. S19W2LC37A37M
LC-37A37M
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
LC-37A37M