Adjusting The Rear Brake Light Switch; Checking The Front And Rear Brake Pads - Yamaha DT230 Owner's Manual

1
2
a
b
1. Brake light switch
2. Adjusting nut
Adjusting the rear brake light
switch
The rear brake light switch, which is
activated by the brake pedal, is prop-
erly adjusted when the brake light
comes on just before braking takes
effect. If necessary, adjust the brake
light switch as follows.
Turn the adjusting nut while holding
the rear brake light switch in place.
To make the brake light come on ear-
lier, turn the adjusting nut in direction
a. To make the brake light come on
later, turn the adjusting nut in direc-
tion b.
PERIODIC MAINTENANCE AND MINOR REPAIR
FRONT
1. Indicator groove
EAU00713
Checking the front and rear
brake pads
The front and rear brake pads must
be checked for wear at the intervals
specified in the periodic maintenance
and lubrication chart. Each brake pad
is provided with a wear indicator
groove, which allows you to check
the brake pad wear without having to
disassemble the brake.
1
1. Indicator groove
EAU01314
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the
wear indicator groove has almost dis-
appeared, have a Yamaha dealer
replace the brake pads as a set.
6-23
REAR
1
1
2
3
4
5
6
7
8
9