Fuel; 2-Stroke Engine Oil - Yamaha DT230 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
1
2
3
1. Filler tube
4
2. Fuel level

Fuel

5
Make sure that there is sufficient fuel
in the tank. Fill the fuel tank to the
6
bottom of the filler tube as shown in
the illustration.
7
w
8 Do not overfill the fuel tank,
8
otherwise it may overflow
when the fuel warms up and
9
expands.
8 Avoid spilling fuel on the hot
engine.
cC
2
Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since
fuel may deteriorate painted sur-
faces or plastic parts.
Recommended fuel:
Regular gasoline
EAU01183
For Australia:
Unleaded fuel only
Fuel tank capacity:
Total amount:
11.0 L
Reserve amount:
EW000130
2.0 L
EAU00185
EAU00192
1. 2-stroke engine oil tank cap
2. 2-stroke engine oil tank

2-stroke engine oil

Make sure that there is sufficient oil in
the 2-stroke engine oil tank. If neces-
sary, add oil as follows.
1. Remove panel A. (See page 6-6
2. Remove the 2-stroke engine oil
3. Install the 2-stroke engine oil
3-8
1
2
for panel removal and installation
procedures.)
tank cap and add the recom-
mended oil.
tank cap and the panel.
EAU01413