1. Projection (×2)
2. Seat holder (×2)
To install the seat
1. Insert the projections on the front
of the seat into the seat holders
2. Place the seat in the original
position, and then tighten the
Make sure that the seat is properly
secured before riding.
INSTRUMENT AND CONTROL FUNCTIONS
1. Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the
key as shown.
To lock the helmet holder, place it in
the original position, and then remove
Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
Adjusting the front fork
This front fork is equipped with damp-
ing force adjusting screws.
equally, otherwise poor handling
and loss of stability may result.