Download  Print this page

Changing The Coolant - Yamaha DT230 Owner's Manual

Hide thumbs

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
2
3
1. Radiator cap stopper bolt
4
2. Radiator cap

Changing the coolant

5
1. Put the motorcycle on a level
place.
6
2. Remove cowling B and panel B.
(See pages 6-5 and 6-7 for cowl-
7
ing and panel removal and instal-
lation procedures.)
8
3. Remove the radiator cap stopper
bolt and the radiator cap.
9
2
1. Coolant drain bolt
4. Place a container under the
EAU03101
engine and remove the coolant
drain bolt.
1
1. Maximum level mark
2. Minimum level mark
3. Reservoir tank hose
6-12
1
2
5. Disconnect the reservoir tank
hose on the reservoir tank side
and drain the coolant from the
reservoir tank.
6. After draining the coolant, thor-
oughly flush the cooling system
with clean tap water.
7. Replace the coolant drain bolt
washer if it is damaged and tight-
en the coolant drain bolt to the
specified torque.
Tightening torque:
Coolant drain bolt:
10 Nm (1.0 m
0
kg)
3

Advertisement

Table of Contents

This manual is also suitable for:

Dt230nLanza dt

Comments to this Manuals

Symbols: 0
Latest comments: