Yamaha DT230 Owner's Manual page 39

PRE-OPERATION CHECKS
ITEM
Chassis fasteners
1
Instruments, lights, sig-
nals and switches
2
Sidestand switch
3
NOTE:
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a
4
very short time; and the added safety it assures is more than worth the time involved.
5
w
If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operat-
6
ing the motorcycle.
7
8
9
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
CHECKS
4-3
PAGE
—
3-5, 6-34–6-38
3-16–3-17
EWA00033