Handlebar Switches - Yamaha DT230 Owner's Manual

1
3
1. Dimmer switch
2. Turn signal switch
3. Horn switch "*"

Handlebar switches

Dimmer switch
Set this switch to "&" for the high
beam and to "%" for the low beam.
Turn signal switch
To signal a right-hand turn, push this
switch to "6". To signal a left-hand
turn, push this switch to "4". When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after
it has returned to the center position.
INSTRUMENT AND CONTROL FUNCTIONS
2
Horn switch "*"
Press this switch to sound the horn.
EAU00118
EAU00121
EAU00127
EAU00129
1. Engine stop switch
2. Start switch ","
Engine stop switch
Set this switch to "$" to stop the
engine in case of an emergency,
such as when the motorcycle over-
turns or when the throttle cable is
stuck.
Start switch ","
Push this switch to crank the engine
with the starter.
cC
See page 5-1 for starting instruc-
tions prior to starting the engine.
3-5
1
2
EAU00138
EAU00143
EC000005
1
2
3
4
5
6
7
8
9