Download  Print this page

Replacing The Fuse - Yamaha DT230 Owner's Manual

Hide thumbs

Advertisement

To store the battery
1. If the motorcycle will not be used
for
more
than
one
remove the battery, fully charge
it, and then place it in a cool, dry
place.
2. If the battery will be stored for
more than two months, check it
at least once a month and fully
charge it if necessary.
3. Fully charge the battery before
installation.
4. After installation, make sure that
the battery leads are properly
connected to the battery termi-
nals.
PERIODIC MAINTENANCE AND MINOR REPAIR
cC
8 Always
month,
charged. Storing a discharged
battery can cause permanent
battery damage.
8 To charge a sealed-type (MF)
battery, a special (constant-
voltage) battery charger is
required. Using a conventional
battery charger will damage
the battery. If you do not have
access to a sealed-type (MF)
battery
Yamaha dealer charge your
battery.
EC000102
keep
the
battery
charger,
have
a
6-33
1. Fuse
2. Spare fuse

Replacing the fuse

If the fuse is blown, replace it as fol-
lows.
1. Turn the key to "OFF" and turn
off all electrical circuits.
2. Remove the blown fuse, and
then install a new fuse of the
specified amperage.
Specified fuse:
30A
2
1
1
2
3
4
EAU00804
5
6
7
8
9

Advertisement

Table of Contents

This manual is also suitable for:

Dt230nLanza dt

Comments to this Manuals

Symbols: 0
Latest comments: