Time Zone - Grandstream Networks HandyTone-496 User Manual

HandTone-496 User Manual
NAT/DHCP Server Information & Configuration:
Cloned WAN MAC Addr:
LAN Subnet Mask:
LAN DHCP Base IP:
DHCP IP Lease Time:
DMZ IP:
Port Forwarding:
End User
Password
IP Address

Time Zone

255.255.255.0
192.168.2.1
120
(in units of hours, default is 120 hours or 5 days)
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
All Rights Reserved Grandstream Networks, Inc. 2004
This contains the password to access the Web Configuration Menu. This
field is case sensitive.
There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HandyTone ATA will acquire its IP address from the first DHCP server it
discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be set. The
HandyTone will attempt to establish a PPPoE session if any of the PPPoE
fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are reset to zero by default.
This parameter controls how the displayed date/time will be adjusted
according to the specified time zone.
(in hex format)
(default is 255.255.255.0)
(base IP for the LAN port, default is 192.168.2.1)
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
Update
16
Grandstream Networks, Inc.
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol