Grandstream Networks HandyTone-496 User Manual page 22

HandTone-496 User Manual
WAN side http
access:
No)
Admin Password
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authenticate
Password
Name
Register Expiration This parameter allows the user to specify the time frequency (in minutes) the
Local SIP port
Local RTP port
Enable Call
Features
Send DTMF
DTMF Payload
Type
No Yes (WAN side access to http server will be rejected if set to
Update
All Rights Reserved Grandstream Networks, Inc. 2005
This contains the password to access the Advanced Web Configuration page.
This field is case sensitive.
SIP Server's URI or IP address
SIP Outbound Proxy Server's URI or IP address
SIP service subscriber's User ID
SIP service subscriber's Authenticate ID. Can be identical to or different from
SIP User ID
SIP service subscriber's account password
SIP service subscriber's name which will be used for Caller ID display
HandyTone ATA refreshes its registration with the specified registrar. The
default interval is 60 minutes (or 1 hour). The maximum interval is 65535
minutes (about 45 days).
This parameter defines the local SIP port the HandyTone ATA will listen and
transmit. The default value for FXS port 1 is 5060. The default value for FXS
port 2 is 5062.
This parameter defines the local RTP-RTCP port pair the HandyTone ATA will
listen and transmit. It is the base RTP port for channel 0. When configured,
channel 0 will use this port _value for RTP and the port_value+1 for its RTCP;
channel 1 will use port_value+2 for RTP and port_value+3 for its RTCP. The
default value for FXS port 1 is 5004. The default value for FXS port 2 is 5008.
Default is No. If set to Yes, Call Forwarding & Do-Not-Disturb are supported
locally
This parameter controls how DTMF events are transmitted. There are 3 ways:
in audio which means DTMF is combined in audio signal (not very reliable
with low-bit-rate codec), via RTP (RFC2833), or via SIP INFO.
This parameter sets the payload type for DTMF using RFC2833
22
Grandstream Networks, Inc.