Grandstream Networks HandyTone-496 User Manual page 5

HandTone-496 User Manual
HandyTone-496 has two FXS ports. The RJ11 jack next to the LAN is called FXS port 1 and the
RJ11 jack on the side of the HandyTone-496 is called FXS port 2. Each FXS port can have a separate
SIP account. This is a key feature of HandyTone-496. Both ports can make calls concurrently.
Following are the steps to install a HandyTone-496:
1. Connect a standard touch-tone analog telephone (or fax machine) to FXS port 1.
2. Connect another standard touch-tone analog telephone (or fax machine) to FXS port 2.
3. Insert the Ethernet cable into the WAN port of HandyTone-496 and connect the other end of
the Ethernet cable to an uplink port (a router or a modem, etc.)
4. Connect a PC to the LAN port of HandyTone-496.
5. Insert the power adapter into the HandyTone-496 and connect it to a wall outlet.
Please follow the instructions in section 6.2.1 to configure the HandyTone-496.
5
Grandstream Networks, Inc.