Table of Contents
Advertisement
HandTone-496 User Manual
Dial Plan Prefix:
No Key Entry
Timeout:
Use # as Dial Key:
Use random port:
NAT Traversal:
keep-alive interval:
Use NAT IP
Proxy-Require:
TFTP Upgrade
Server:
HTTP Upgrade
Server:
Auto Upgrade:
SUBSCRIBE for
MWI:
Offhook Auto-Dial:
Send Flash Event:
FXS Impedance:
Caller ID Scheme:
Disable Call-
Waiting:
Polarity Reversal:
NTP Server:
Send Anonymous:
Lock keypad update:
Special Feature:
(this prefix string is added to each dialed number)
4
(in seconds, default is 4 seconds)
No
Yes (if set to Yes, "#" will function as the "(Re-)Dial" key)
No
Yes
No
Yes, STUN server is:
20
(in seconds, default 20 seconds)
message)
Require header)
168
75
215
.
.
.
No
Yes, check for new firmware every
No, do not send SUBSCRIBE for Message Waiting Indication
Yes, send periodical SUBSCRIBE for Message Waiting Indication
offhook)
No
Yes (Flash will be sent as a DTMF event if set to Yes)
current setting is " 600 Ohm (North America)"
current setting is " Bellcore"
No
Yes
No
Yes (reverse polarity upon call establishment and termination)
time.nist.gov
No
Yes (caller ID will be blocked if set to Yes)
No
Yes (configuration update via keypad is disabled if set to Yes)
current setting is ""
stun.mycompany.com
(if specified, this IP address is used in SIP/SDP
(if specified, the content will appear in Proxy-
188
(for remote software upgrade and configuration)
(IP address or URL)
(User ID/extension to dial automatically when
(URI or IP address)
21
Grandstream Networks, Inc.
(URI or IP:port)
7
days (default 7 days)
Advertisement
Table of Contents
