Switching The Hob On; Switching On A Zone And Setting A Power Level - Baumatic BKF24ID Instruction Manual

Switching the hob on

o When the hob is connected to the power supply, the buzzer will
beep once and all the indicator lights will turn on for about 1
second then switch off again. After this, the hob will enter stand-
by mode.
o Press the ON/OFF power button (2).
All the cooking zone indicators will show "—".
o

Switching on a zone and setting a power level

o Press the cooking zone
that you want to use to. The relevant cooking zone indicator will
flash power level "
o Select the power level for the cooking zone that you have
selected, by using the plus and minus buttons (3). If y
the plus button once, the power level will set to "8". If you press
the minus button once, the power level will set to "1".
You can then adjust the power level using the plus and minus
o
buttons (3) or the power level slider control (5).
o When the cooking zone indicator shows the po
require, release the plus and minus buttons or slider control and
the cooking zone will start to heat up the pan.
selection button (1) of the cooking zone
0".
12
ou press
wer level that you