Installing Internal Drives; Internal Drive Bays - IBM eServer xSeries 255 Option Installation Manual

Hide thumbs Also See for eServer xSeries 255:
Table of Contents

Advertisement

30. If you have other options to install or remove, do so now; otherwise, go to

Installing internal drives

If you add different types of drives, your system can read multiple types of media
and store more data. Several types of drives are available, such as:
v Diskette
v Hard disk
v CD-ROM
v Tape, including digital linear tape (DLT), super digital linear tape (SDLT), and
Note: The server supports both internal and external tape drives.
Your server contains hardware that enables you to replace a failed hard disk drive
without turning off the server. Therefore, you have the advantage of continuing to
operate your system while a hard disk drive is removed or installed. These drives
are known as hot-swap drives.
Each hot-swap drive has two indicator lights (see the User's Guide on the xSeries
Documentation CD). If the amber hard disk drive status light for a drive is lit
continuously, that individual drive is faulty and requires replacement. When the hard
disk drive status light indicates a drive fault, you can replace a hot-swap drive
without turning off the server.
Each hot-swap drive that you plan to install must be mounted in a hot-swap-drive
tray. The drive must have a single connector attachment (SCA) connector.
Hot-swap-drive trays come with hot-swap drives.

Internal drive bays

Internal drives are installed in bays. The following illustration identifies the bays for
the tower and rack models.
Standard
drive cage, hot-swap
drive bays 1 - 6
Optional
drive cage,
drive bays 7 - 12
(Optional SCSI
backplane required)
v Your server comes with one integrated drive electronics (IDE) CD-ROM drive and
v The CD-ROM drive bay (bay B, right front) supports 5.25-inch, half-high,
3) Tighten the captive screw on the cable-management-arm bracket to the
server.
4) Reinstall the fan in fan bay 7.
"Completing the installation" on page 68.
linear tape-open (LTO)
hot-swap
one 3.5-inch, 1.44 MB diskette drive.
removable-media drives. A CD-ROM drive comes preinstalled in the server.
Non-hot-swap
drive bay A
Non-hot-swap
drive bay B
Non-hot-swap
drive bay C
Non-hot-swap
drive bay D
Chapter 2. Installing options
37

Advertisement

Table of Contents
loading

Table of Contents