Table of Contents
Advertisement
Motor Adjustment
Screws
Adjusting the scroller drive belt tension:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Routine Maintenance
See
General belt adjustment instructions:, page
Remove the scroller if not already done. See
cartridge:, page
26.
Using both hands, gently fold in the IMF doors and move the assembly toward
the rear lens.
Loosen, but do not remove, the three motor mounting plate screws so that the
motor moves freely.
Turn the pulley back and forth two or three times and allow the spring to take up
the slack in the belt.
Tighten the three screws.
Pinch the belt together to ensure it maintains pressure and rotate the motor
pulley to ensure it turns freely.
Motor Pulley
Belt Tension
38.
Removing and replacing the scroller
39
Advertisement
Table of Contents
