Static Wheel Module (Swm); Controlling The Static Wheel Module - ETC Source Four Revolution User Manual

With wybron inside
Hide thumbs Also See for Source Four Revolution:
Table of Contents

Advertisement

Stati c Wheel Module (SWM)
The Static Wheel Module contains a wheel with three positions for static M-size steel or
glass gobos or dichroic color filters and an open position. If desired, the open position can
be used to hold a fourth gobo or filter.
C A U T I O N :
C o n t r o l l i n g t h e S t a t i c W h e e l M o d u l e
The Static Wheel Module uses an 8-bit channel to select the frame. Only full frames can be
produced. Use the table below to set the Wheel Position channel.
Open (Position 0)
Position 1
Position 2
Position 3
Reserved (Position 3)
20
To prevent cracking of glass gobos and for best image contrast, the silver reflective
surface of the gobo must face the lamp and the black surface of the gobo must face
the lenses.
Wheel Position Channel
DMX Percent
DMX Decimal
0-5%
0-13
6-10%
14-26
11-15%
27-39
16-20%
40-50
21-100%
51-255
Source Four Revolution User Manual

Advertisement

Table of Contents
loading

Table of Contents