Download Print this page

Snom 821 User Manual page 4

Hide thumbs Also See for 821:

Advertisement

Q How do I change the volume when I am in a call?
A When you are in a call press the left or right end of the
lower or raise the volume of the phone.
Q How do I change the ringer volume?
A With the receiver on the hook, press the left or right end of the
button to lower or raise the volume of the phone.
Q How do I put a call on hold?
A Simply press
call. If you have more than one call on hold, use the up and down arrows on
the navigation button to select the call you wish to retrieve, then press
Q Can I transfer a call to another number?
A To perform an attended transfer, first press
Dial the number of the party you wish to transfer the call to and press
make the call. When you have introduced the call to the third party, press
once again and then
You may then replace the receiver on the hook.
If you don't need to announce the transfer to the receiving party, begin the
transfer process by pressing
wish to transfer the call to and just press
transferred anyway provided the number you are transferring to is ringing.
Q Can I make a conference call?
A To make a conference call, press the
call to place this call on hold. Dial the number of the next party you wish to
connect in and press
when you have introduced the conference. You can repeat this process with
up to five parties. When all parties that you wish to conference are on hold,
press the
Pressing
when you are in conference will place all parties on hold –
press
once more to resume the conference.
If any of the other parties hang up, you will stay connected to the remaining
party until the call is ended normally by hanging up. If you wish to exit the
conference, but leave the other parties connected, simply hang up by pressing
X
. The other parties will remain in call until they hang up.
Telephone Service User Guide SNOM821 20110415.001.doc
to place a call on hold. Press
to connect the call and complete the transfer.
to make the call. Place this second call on hold
button to connect the calls and begin the conference.
to place a call on hold .
. , then dial the number of the party you
. The call will be 'blind'
button whilst you are in a normal
button to
again to retrieve the
to
4
4/21/2011
.

Advertisement

loading