Operating Instructions - Shark SSG-503027E Operator's Manual

Hide thumbs Also See for SSG-503027E:
Table of Contents

Advertisement

STEP 1: Check engine oil level. Oil level should be level with the bottom of
the oil filler neck. Be sure the machine is level when checking the oil level.
(Refer to the engine's operating manual included with machine.) We rec-
ommend that the oil be changed after the first 5 hours of use, then once
every 50 hours. Note: Improper oil levels will cause low oil sensor to shut
off engine. IMPORTANT! Do not run engine with high or low oil levels
as this will cause engine damage.
Garden
Hose
STEP 3: Connect garden hose to
the cold water source and turn wa-
ter on completely. Never use hot
water.
Fuel
Valve
STEP 5: Rotate the fuel shut-off valve to the "On" posi-
tion. Slide the fuel valve lever to the "ON" position. When
the engine is not in use, leave the fuel valve in the "OFF"
position.
8

OPERATING INSTRUCTIONS

Oil Dipstick
Cold
Water
Source
STEP 4: Trigger the spray gun
to eliminate trapped air then wait
for a steady flow of water to
emerge from the spray nozzle.
97-6142, 97-6134 • REV. 9/04
STEP 2: Fill gas tank with unleaded
gasoline. Do not use leaded gaso-
line.
STEP 6: Pull the choke lever out to the "Choke" posi-
tion (on a warm engine, leave the choke lever in the
run position). Push the choke lever to the "Closed" po-
sition. To restart a warm engine, leave the choke lever
in the "Open" position.
Gas
Tank
Choke
Lever

Advertisement

Table of Contents
loading

Table of Contents