Toshiba digital copiers Service Manual page 39

3
Replacing GA-1121 board components
VAROITUS: Paristo voi räjähtää, los se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan
tyyppiin. Hävitä Käytetty paristo valmistajan ohjeiden mukaisesti.
ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av
apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner.
VARNING: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av
apparat-tillverkaren. Kassera använt batteri enligt fabrikantens instruktion.
T
O REPLACE THE BATTERY
1. Locate the battery on the GA-1121 board socket BT200 (see Figure 3-4 on page 3-8).
2. Carefully lift up the clip that holds the battery.
Use caution when lifting up the clip; excessive force could cause the clip to lose its
tension.
Socket
Clip +
F 3-8
IGURE
3. Pull the battery out of its socket and release the clip.
4. To insert a new battery, slide the battery into the socket under the clip with the positive
(+) side facing up.
Make sure the clip holds the battery securely in the socket.
5. Reassemble the GA-1121 and verify functionality (see page 3-22).
When you power on, let the start-up diagnostics complete, then power off and
N :
OTE
power on again to initialize the realtime clock.
The date and time of day are lost when the old battery is removed. See the GA-1121 user
documentation for instructions on entering Server Setup to program the system date and
time.
Battery
GA-1121 battery
3-15