Toshiba digital copiers Service Manual page 20

2
2-4
Using the GA-1121 Control Panel
These screens contain the following information:
status screen
Idle
Info
Server Name
XXXX MB 2.0
RIP status screen
RIP
Cancel Job
doc.eps
Jack D.
Busy ####K
status screen
Print
Print
Cancel Job
Jane D.
Copies: 1/100
X3E-XXXXXX
screen
Alert
Alert
Load LT paper
in tray
screen
Functions
Functions
Print Pages
Scan Job
Suspend Printing
Resume Printing
Shut Down
Run Setup
Run Diagnostics
Tray Alignment
Calibration
The first line of this screen displays the status of
the GA-1121. The status can be Info, Processing,
Printing, Error, or Offline. The second line of the
screen displays the copier's name on the network.
Scrolling down displays the amount of disk space
available on the hard disk drive, and the current
system software version. Normally, if no jobs are
currently being processed or printed, the Idle
screen displays Info (a job may be between
processing and printing). The Idle screen is the
default screen.
Allows you to cancel the job being processed.
Displays the name of the file, the name of the user
who sent the job, the status, and the amount of
the job in kilobytes that has been processed so far.
To cancel a job, display Cancel Job and press the
Cancel button.
Allows you to cancel the job being printed.
Displays the name of the user who sent the job,
the number of copies printed so far, and the
number of copies requested. To cancel a job,
display Cancel Job and press the Cancel button.
Displays a message if an error or other Alert
condition arises. Pressing the down arrow button
may be necessary to view the entire error message.
If other screens are being accessed, the Alert screen
is redisplayed frequently until the condition is
resolved.
Gives you access to administrative functions not
normally performed from a remote workstation
(see "Functions screen" below for information on
the available functions).