Timer Rec; Manual Timer Rec - Sony SRPC-1 Operation Manual

Hd portable digital recorder hd video processor optical interface unit picture cache board rgb 60p processor board
Hide thumbs Also See for SRPC-1:
Table of Contents

Advertisement

is effective for obtaining the maximum slow motion
effect. However, SD monitor output is disabled. Use HD
monitor output.
4
Select [SET] in the submenu window.
Note
When FPS FORMAT is set to an invalid format, [SET]
appears in gray indicating invalid. In this case, return
to step 3 and set the items correctly.
5
Check the settings, and then select [OK].
To make the timecode continuous
Make the following settings in the TC Setup menu.
RUN MODE: R RUN (Rec Run)
TCG MODE: PRST (Preset) or RGN (Regen), either
available.
REGEN SOURCE: INT L (Internal LTC) (following the
timecode recorded on tapes)
For details on the TC Setup menu, see "TC Setup Menu"
(page 46).

6-2 Timer Rec

The Timer Rec function allows you to use the memory of
the optional HKSR-102 board to capture and record
images at specified intervals. It is comparable to the
Interval Rec function of previous models, but enables
time-lapse recording and recording over longer periods.
The following two methods are available.
Manual Timer Rec: Specifies the number of frames to
record in a single take. Each time that recording starts,
the specified number of frames are captured
continuously.
Auto Timer Rec: Specifies the number of frames to
record in a single take and the interval (seconds)
between takes. Each time that recording starts after the
specified interval, the specified number of frames are
captured continuously.
The following formats can be recorded by Timer Rec.
1080 422: 23.98/24/25/29.97PsF, 50P, 59.94P
1080 444SQ/444HQ/422x2: 23.98/24/25/29.97PsF
Note
Timer Rec cannot be used at the same time as Cache Rec.

6-2-1 Manual Timer Rec

Note
Set SELECT FPS in the SYSTEM Setup menu to "OFF".
1
In the SYSTEM Setup menu, set EDIT >TIMER REC
to "MANU".
2
In the submenu window, select "Manu Frm" and then
press the SELECT/ENTER dial.
A setting window opens.
3
Rotate the SELECT/ENTER dial to select the number
of frames to record in one take.
4
Start recording.
In Manual Timer Rec mode, "M" appears on the
HOME screen before the number of lines of the signal
format.
89
6-2 Timer Rec

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srw-1Hksr-101Hksr-102Hksr-103

Table of Contents