Battery Test - Bosch Solution 144 User Manual

Solution 144 User Guide
All zones have been
successfully tested
Press OK or MENU
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > System Testing >

Battery Test

This menu allows you to manually test the systems back
up battery. The system will automatically test the battery
once per day and every time the system is armed.
The battery test can take up to two minutes to complete
and the keypad will display the voltage of the battery
during the test.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [7] + [9] + [1].
The keypad will display current voltage whilst under
test:
Battery test in progress.
Please wait..
Voltage = 13.4V
To Go Back Press OK
If the battery has passed the test, the keypad will
display:
Battery test Passed.
Press OK to continue
To Go Back Press OK
If the battery has failed the test, the keypad will
display:
Battery test Failed.
Please Call for Service.
To Go Back Press OK
2. Press [OK] to exit.
40
MENU 7-9-1
Bosch Security Systems 04/12 BLCC600U