Destination 2; Call Forward On - Bosch Solution 144 User Manual

Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [5] + [1] + [1].
If the control panel is not programmed to report
using one of the self monitoring formats, the
keypad will display the following:
The current reporting
format doesn't allow user
changes. Contact your
installer.
If the control panel has been configured to report
via a self monitoring format, the keypad will display
information for telephone number 1.
Phone 1= 0453287306
Phone 2=
Phone 3=
Press

2. Use the [] and [] keys to select the phone number
to add or change, then press [OK] to select.
The keypad will display the following:
Destination 1 Phone 1
0453287306_
Press

3. Use the [] and [] keys to scroll the cursor left and
right across the phone number. Use the [] and []
keys to change the individual digit in the number or
press the [OFF] key to clear the whole number and
then enter the new number using the 0-9 keys.
4. Press [OK] to save and exit, or press [MENU] to
cancel.
Comms > Telephone Numbers >

Destination 2

This menu allows up to 5 phone numbers to be
programmed when one of the self monitoring formats
have been configured by your installer. See MENU 5-1-1 for
more information.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [5] + [1] + [2].
If the control panel is not programmed to report
using one of the self monitoring formats, the
keypad will display the following:
Bosch Security Systems 04/12 BLCC600U
OK or MENU
0-9 OK to SAVE
MENU 5-1-2
The current reporting
format doesn't allow user
changes. Contact your
installer.
If the control panel has been configured to report
via a self monitoring format, the keypad will display
information for telephone number 1.
Phone 1= 0453287306
Phone 2=
Phone 3=
Press

2. Use the [] and [] keys to select the phone number
to add or change, then press [OK] to select.
The keypad will display the following:
Destination 2 Phone 1
0453287306_
Press

3. Use the [] and [] keys to scroll the cursor left and
right across the phone number. Use the [] and []
keys to change the individual digit in the number or
press the [OFF] key to clear the whole number and
then enter the new number using the 0-9 keys.
4. Press [OK] to save and exit, or press [MENU] to
cancel.
Comms > Telephone Numbers >

Call Forward On

When you leave your premises, you no longer need to
remember to manually activate the Call Forward On feature
via the telephone. These addresses allow you to program
the Call Forward On sequence that the control panel will
automatically use to divert your phone when you turn Area
1 'On' .
In Australia, a typical sequence of activating the Call-
Forward On – After Time (All Calls) is described below:
For other countries please substitute the appropriate
commands after consultation with your telephone company.
Enter programming mode (PIN + MENU) then,
1. *61 (To turn Call Forward On – After Time).
2. Telephone number that you want calls to go to (e.g.
0416123456).
3. *5# (End of Call Forward sequence after 5 seconds).
Therefore, you would program as per the following steps to
program the call forward on number as: *610416123456*5#.
1. Enter [MENU] + [5] + [1] + [6].
The keypad will display information for telephone
number 1.
Solution 144 User Guide
OK or MENU
0-9 OK to SAVE
MENU 5-1-6
29