Suggestions For Use - Russell Hobbs 18970-56 Instructions And Warranty

3. Fit the mixing leg to the motor body as explained in the FITTING OR REMOVING
ATTACHMENTS section.
4. Ensure the hand blender is unplugged or switched off at the wall socket.
5. Put the ingredients into a mixing bowl, beaker or a different durable bowl, which is
sufficiently tall and wide enough to avoid splashing.
6. Plug the unit into the mains power supply.
7. Dip the mixing leg and blade as deep as possible into the mixture.
NOTE: When choosing not to use the beaker, ensure that the blender is not
immersed beyond the point where the mixing leg and blade join with the motor
body.
8. Press the top button (1) for low speed, release to switch off.
9. Press the bottom button (2) for high speed, release to switch off.
10. Use low speed for lighter applications (e.g. using mainly liquid ingredients), and
high speed for heavier applications (e.g. using mainly solid ingredients). We
recommend first starting on a low speed and increasing the speed as needed,
depending on the desired consistency of the food being processed.
11. Work the hand blender through the ingredients with a gentle circular movement
and up and down movement.
NOTE: Do not operate the hand blender before inserting it into the food being
mixed. Don't run the motor for more than 3 minutes, if you have used it for 3
minutes leave it for 3 minutes to cool down before using it again.
12. When you have finished using your hand blender, unplug the appliance and
remove the mixing leg and blade by holding the motor body and turning the mixing
leg and blade in an anti-clock wise direction.
13. Clean the unit and the attachments thoroughly.
NEVER USE YOUR APPLIANCE IN A BOWL OR SAUCEPAN WHILE
COOKING.

SUGGESTIONS FOR USE


Move the mixing leg and blade gently around the mixture to ensure uniform
results.

If you want to clean the sides and base of the beaker/container with a hand-held
utensil, first switch the machine OFF (by switching it off at the wall socket).
8