Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Russell Hobbs 14331
Summary of Contents for Russell Hobbs 14331
- Page 1 instructions...
-
Page 3: Important Safeguards
Read the instructions and keep them safe. If you pass the blender on, pass on the instructions too. Remove all packaging, but keep it till you know the blender works. important safeguards Follow basic safety precautions, including: 1 This blender must only be used by a responsible adult. Use and store the blender out of reach of children. - Page 4 preparation 1 Sit the motor unit on a dry, firm, level surface, close to a power socket and out of reach of children. 2 Route the cable so it doesn’t overhang, and can’t be tripped over or caught. 3 Align the arrow d on the jug base with the open padlock U on top of the motor unit, lower the jug on to the motor unit, then turn the jug to bring the arrow d over the closed padlock L on top of the motor unit.
- Page 5 finished? 22 Turn the speed control to Y, and wait till the blades stop moving before removing the lid from the jug, or removing the jug from the motor unit. hot liquids 23 At higher temperatures, the lid may soften enough to lose its seal, allowing the contents of the jug to escape, so, when using hot liquids: a) before pouring into the blender, let the liquid cool down to the sort of temperature you can handle comfortably (i.e.
- Page 6 6 We don’t recommend using a dishwasher. The extreme environment inside the dishwasher can affect the surface finishes. 7 Wipe the outside of the motor unit with a clean damp cloth. 8 Don’t put the motor unit in water or any other liquid. 9 Don’t use harsh or abrasive cleaning agents or solvents.
- Page 7 black olive and anchovy tapenade/sauce 250g pitted black olives 60g anchovy fillets, drained 3 tbsp capers, drained 150ml olive oil 2 tbsp brandy (optional) fresh ground black pepper Put everything but the oil into the jug. Fit the lid, remove the cap, and add about half the oil.
- Page 8 connection The product doesn’t need an earth. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician. Don’t use a non- rewireable/moulded plug unless the fuse cover is in place.
Need help?
Do you have a question about the 14331 and is the answer not in the manual?
Questions and answers