Russell Hobbs 18970-56 Instructions And Warranty page 11


That the unit has been wired correctly and that the wall socket is switched on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the appliance, make sure that:

The unit is packed carefully back into its original packaging.

Proof of purchase is attached.

A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, in order to avoid any hazard. If service becomes necessary within the
warranty period, the appliance should be returned to an approved Home of Living Brand
(Pty) Ltd service centre. Servicing outside the warranty period is still available, but will,
however, be chargeable.
CHANGING THE FITTED/MOLDED PLUG
Should the need arise to change the fitted/molded plug, follow these instructions:
Connect three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth, Blue = Neutral & Brown = Live
11