ALARM When the water tank is full, E4 will be displayed on the LED panel. To resume
operation, please empty the tank if in Dehumidifier mode, or remove the rubber cap
from drain hose, wait for internal tank to empty than empty the main tank if in Air
Conditioner mode. The E4 warning will disappear after draining, and the unit can be
restarted by pressing the Power On key. E8 error / air filter change indicator can be
reset by pressing the FAN SPEED key on the control panel for 3 seconds.
CHILD LOCK
Press
and the unit will enter child lock mode; control panel and functions cannot be
operated until CHILD LOCK is disabled. To resume normal operation please press again
the same keys for 3 seconds.
Remote control
keys on the AirCube control panel at the same time for three seconds
On/Off
Function selection
Start/Stop timer
Auto operation
High fan speed
Low fan speed
Sleep mode
Temp/Humidity + / -
Swing mode
Page 11 of 16