Multi Protective Function - ElectrIQ SILENT 12 User Manual

Sleep Mode:
In the cooling Mode, Press the "UP" and "FAN" buttons together to turn on the sleep mode, then the unit
will work on Energy-Saving and lowest fan mode.
Note: The sleep mode is not operational in dehumidifying or Fan mode. Please use the remote control to
set the sleep mode, it cannot be set from the air con touch control panel.
2. Operating Instructions of the Remote Control
2.1 Power: Press the
2.2 Mode: press the
dehumidification and heating mode (optional)
2.3 Up: press the
2.4 Down: press the
2.5 Fan: press the
2.6 Timer: press the
2.7 Cleaning: Press the
off the unit, but the fan will continue to work for 3 minutes to dry off the
the evaporator reducing the mould and bacterial grow
2.8 Press the key
2.9 Sleep Mode: Press the

3. Multi protective function

3.1. Frost Protection Function:
In cooling, dehumidification or economic power saving mode, if the temperature of the exhaust pipe is too
low, the machine will automatically enter protection status; if the temperature of the exhaust pipe rises to
a certain temperature, it can automatically revert to normal operation.
3.2. Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will automatically sound an alarm,
and the LDC temperature display area will show "FL". At this point, you need to move the drainage pipe
connecting the machine or the water outlet to sewer or other drainage area to empty the water (details
see Drainage Instructions at the end of this chapter). After the water is emptied, the machine will
automatically return to the original state.
3.3. Automatic Defrosting (heating and cooling models have this function):
The machine has automatic defrosting function: during defrosting, heating symbol on the display screen will
flash.
3.4. Automatic Thermal Protection:
To protect the service life of the machine, the machine has automatic thermal protection in heating mode.
During the protection period, the compressor and the lower motor will stop operation and will automatically
return to normal heating state after the temperature of the machine recovers.
3.5. Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection function after the
Page 8 of 13
key to turn on or off the machine
key to switch between cooling, fan,
key to increase temperature and timer set value
key to reduce temperature and timer set value
key to cycle between high, medium and low fan speed
key to set timer value
key to stops the compressor working after turning
to switch between Celsius and Fahrenheit
key to turn on the sleep mode.