Table of Contents
Advertisement
CLIO Service Manual
5.20.1.
B
H
OTTOM
INGE
1.
Follow the Keyboard Base Bottom removal procedure, above.
2.
Using a pair of slip-joint pliers, carefully grasp the Bottom Hinge arm (43) protruding from
the left side of the Keyboard Base Top (47). Gently rotate the hinge towards you
approximately 30 degrees while applying a gentle lifting force. When the hinge (43, 44)
comes loose, lift it straight up. Store in a secure location.
5.20.2.
B
H
OTTOM
INGE
1.
Grasp the Bottom Hinge (43, 44) by the rectangular hinge arm. The small metal
orientation tab should be facing you with the hinge arm protruding to the left.
2.
Lower the Bottom Hinge (43, 44) into the Keyboard Base Top (47) at an angle of
approximately 30 degrees. Insert the orientation tab into the slot on the Housing and
rotate the lower torque hinge into place.
3.
Follow the Keyboard Base Bottom refit procedure, above.
5.21.
T
H
OP
INGE
Please refer to photos 4, 12, 23, 24 in Chapter 2.
5.21.1.
T
H
– R
OP
INGE
1.
Follow the Display Top removal procedure, above.
2.
Locate the two #1 Phillips head screws (10)(one each at the top and bottom of the Top
Hinge).
3.
Remove the two screws (10) using a #1 Philips head screwdriver. Store in a secure
location.
4.
Grasp the Top Hinge (16) and lift it straight up. Store in a secure location.
5.21.2.
T
H
– R
OP
INGE
1.
Lower the Top Hinge (16) into position on the LCD Unit (66).
2.
Insert the two K2.2x6.5 screws (10) in their holes and fasten securely using a #1 Phillips
head screwdriver.
3.
Follow the Display Top refit procedure, above.
5.22.
S
PEAKER
Please refer to photos 14, 15 in Chapter 2.
The information contained in this document is confidential and the sole property of Vadem Inc. Written
permission must be obtained to reprint or use any of this information.
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - anthonyh@ashlandhome.net
– R
EMOVAL
– R
EFIT
– R
& R
EMOVE
EFIT
EMOVAL
EFIT
– R
& R
EMOVE
EFIT
5-14
CLIO Tear-down & Rebuild
Advertisement
Table of Contents
