Control Panel - Kenmore 580.53301 Owner's Manual

CONTROL PANEL
Your dehumidifier has a control panel containing an indicator and two controls --
Auto Shut-Off, Fan Speed, and Humidity Control.
Auto Shut-Off ---This tamp glows when the bucket fills or is missing.
Fan Speed --- This controls the speed of the airflow.
Humidity Control--- This controls the moisture in the room.
TO OPERATE THE DEHUMIDIFIER:
1. Turn the Humidity Control to Off. Plug the power supply cord intoan electrical outlet.
2. The HumidityControl can be set anywherebetween Off and Max for normal operation.
If you need more dehumidification, turnthe HumidityControltowardMax. If you need less
dehumidification, turnthe HumidityControltowardOff.
3. Turn the HumidityControlto Off to stopthe unitmanually.
4. If you wantto controlthe speed of air flow, turnthe Fan Speed towardLow or High.
Note: Be careful not to lose the water bucket.
This dehumidifier doesn't run if the water bucket is not installed properly.
-6-