Bright- - CBC LC703 Instruction Manual

Exposure settings
WDR/BLC setting
Use WDR/BLC option to set the options for BLC or
WDR camera.
1. Select [WDR/BLC] option on the [EXPOSURE]
menu.
. Use [N] or [F] button to select a mode then press
[M].
• WDR: Set the WDR limit.
- WDR LEVEL: LOW
• BLC: Set the BLC limit.
- BLC LEVEL: LOW
y y
MIDDLE HIGH
y y
MIDDLE HIGH
• HSBLC: Use for adjusting brightness the
specific area of picture. The HSBLC mode is
automatically activated only in low illuminance
scene.
- AREA SETTING: Use [N] or [F] button to
select a area then use [T] or [W] button to
select a ON or OFF. Press [M] to exit the
area setting menu.
- GRAY SCALE: Use [N] or [F] button to
select a gray scale.
y
(GRAY D.GRAY
- HS LEVEL: Use [N] or [F] button to select a
bright level. (5 level)
- MASK STATE: Use [N] or [F] button to
select [ON] or [OFF].
If you set the MASK STATE to ON, the
mask function is activate only when the
HSBLC is activated by auto mode.
• OFF: Not used.
y
BLACK).