Lens Mounting; Back Focus Adjustment; Dip Switch Setting - CBC CL-301 Instruction Manual

LENS MOUNTING

1
2
AUTO IRIS MODE SELECTION
POSITION
DC
DC
AES
AES
VIDEO
VIDEO

BACK FOCUS ADJUSTMENT

1 3 screw
DIP SWITCH
SETTING
No. NAME
Synchronization mode
1
(SYNC)
Back light compensation
2
(BLC)
Auto gain control
3
(AGC)
White balance
4
(WB)
Remove the CCD cover. Then
attach the CS mount lens to
the camera. Please refer to the
drawing on the left.
CAUTION
Be cautious not to use Auto
Iris Lens with over 75mA
LENS
DC iris lens
Manual or fixed iris lens
Video iris lens
2 screw
DIP switch on the left side of the camera
allows you to set the functions of the camera.
Please refer to the following table.
POSITION
L.L. Line lock mode
INT. Internal synchronization mode
ON sets to this position when strong light comes in behind the target
OFF normal position
ON AGC level varies from 0dB to maximum 20dB
OFF normal position
AWB adjusts WB automatically and fixes it in 5sec
ATW tracks and adjusts WB automatically
DC IRIS LEVEL
ADJUSTMENT
DC iris level is preset in the
factory. Only if necessary, adjust
the DC iris level to achieve the
proper picture with AGC off.
Set the auto iris mode selection
switch to the position that
corresponds to the lens which is
mounted to the camera.
Please refer to the table on the left.
If back focus has to be adjusted after mounting
the lens, (1) loosen the back focus lock screw on
the left side of the camera with a (+) screwdriver,
(2) turn the back focus adjustment screw on the
right side of the camera with a (-) screwdriver until
the desired focus is reached, (3) tighten the back
focus lock screw.
FUNCTION
EG-7
DC IRIS
1 L.L INT
SYNC
2 BLC
ON OFF
3 AGC ON OFF
4 AWB ATW
W/B
factory setting