Configuring the IP Phones
Basic Network Settings
Configuring Network Settings Manually
If you disable DHCP on your phone, you need to configure the network settings
manually. You can configure the Network settings using the configuration files,
the IP phone UI, or the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Settings"
on
page A-5.
IP Phone UI
Step
Action
1
For 9112i/9133i:
I
Press
For 480i/480i CT:
Press % on the phone to enter the Options List.
2
For 9112i/9133i:
Select Network Settings.
For 480i/480i CT:
Select Network.
3
Select IP Address and enter the IP address of the phone.
4
Select Subnet Mask and enter the subnet mask.
5
Select Gateway and enter the gateway address.
41-001129-00 Rev 09, Release 1.4.1
on the phone to enter the Options List.
"Network
4-7