By Yukiko Operation - Unitech PA970 Operation Manual

Unitech Electronics Co., Ltd
11. Under "Setup", select "Set Up Show". You may check the slides you want to show
in the presentation(Or select "All Slides" in show list). For the slide you do not want
to show, uncheck the slide under slide title. For Advanced slides, select "Manually".
Check "Loop continuosly" if you want the slides to be shown in loop.
Tap"OK".
12. Under "Setup", select "View Show". The slides are presented. Tap the slide to go
to next slide. (Note that slide 4 and 6 is not presented as they are unchecked in the
above setting)
Created PA970
by Yukiko Operation
Manual
V1.1 Page 75 of 75