Network And Dial-Up Connection - Unitech PA970 Operation Manual

Unitech Electronics Co., Ltd
2. Check "Enable character repeat".
3. Adjust the repeat delay and repeat rate.
4. Place the cursor in the field of "Tap here and hold down a key to test".
5. Press and hold a key on the keypad.
6. You should see the character is repeated until you release the key.

4.10 Network and Dial-up Connection

Path: Start/Settings/Control Panels/Network and Dial-up connection
This setting is to configure the network setting and Dial-up connection.
1. Double tap "Network and Dial-up connection".
Created PA970
by Yukiko Operation
Manual
V1.1 Page 121 of 121