By Yukiko Operation - Unitech PA970 Operation Manual

Unitech Electronics Co., Ltd
12. Under "Slide Show" , select "Automatic Advance(Loop)". The image files will be
displayed one by one according to your setting in step 10. It will always go back to
the first image in loop until you tap the triangle arrow at the bottom left and select
"End show".
13. You may save this show setting by select "File > Save show setting as" , give a
name to this setting and tap "OK". (If you select "File > Save show setting", it will
overwrite the previous setting).
Created PA970
by Yukiko Operation
Manual
V1.1 Page 60 of 60