Serial Activesync - Unitech PA970 Operation Manual

Unitech Electronics Co., Ltd

3.17 Serial ActiveSync

Path: /Start/Program/Communication/Serial ActiveSync
This tool allows Serial Activesync between the terminal and the host.
1. In Control Panel, double tap "PC Connection". Change the connection to "Serial".
2. On the host, open ActiveSync. Under "File" menu, select "Connection Settings".
Check "allow serial cable or infrared connection to this com port". Select your com
port. Tap OK.
Created PA970
by Yukiko Operation
Manual
V1.1 Page 102 of 102