Pc Connection - Unitech PA970 Operation Manual

Unitech Electronics Co., Ltd
3. Warm start your terminal. Enter your password to login.

4.13 PC Connection

Path: /Start/Settings/Control Panel/PC Connection
This setting allows you to set the device name and specify which type of
communications you want to set for the device to communicate with the host.
1. Double tap "PC Connection".
2. Check "Enable direct connection". Tap "Change Connection". Select the type of
communication that you connect the terminal to your host.
Example:
If you use RS232 cable, you may select "Desktop@57600" or "Desktop@38400" or
"Serial".
If you use USB cable, please select "USB".
Created PA970
by Yukiko Operation
Manual
V1.1 Page 126 of 126